TECHNICAL

Measuring Instruments and Ranges No               Name –Type                           Make              Range                   Quantity        Calibrated Date 1       Digital Vernier Caliper    Mitutoyo-Japan       0 to300  x 0.01mm/12.In                 2       12.05.2010 2   Jaw type Vernier Mitutoyo-Japan       0 to300  x 0.01mm/12.In       3       12.05.2010 3   Medium Vernier Mitutoyo-Japan       0 to300  x 0.01mm/12.In       1       12.05.2010 4   Micrometer  Yamayo-Japan       0 to 25 X 0.01mm       1       12.05.2010 5   Micrometer  Yamayo-Japan       25 to 50 X 0.01mm       1       12.05.2010 6   Micrometer  Yamayo-Japan       50 to 75 X 0.01mm       1       12.05.2010 7   Inside Caliper Local-India       1       12.05.2010 8   Outside side Caliper Local-India       1       12.05.2010 9   Depth Vernier Samrat       0 to150  x 0.01mm/12.In       2       12.05.2010 10   Right Angle Presto       8 Inch.             2       12.05.2010 12   Filler Gauges-sharp end Legend0.0015       26 blade(0.0015” to0.25”)       1       12.05.2010 13   Filler Gauge-round end Legend0.0015       26 blade(0.0015” to0.25”)       1       12.05.2010 14   Radius Gauge(in-out ) SPION-Germany       In & Out Side R 7.5 to 15 mm       1       12.05.2010 15   Thread Gauge Technica-India       0.25 to 6 mm Pitch(62G to 4G)       2       12.05.2010 16   Plane plug Gauge Local-India       (17.75 +0.2)       (12.50+0.2)       (9.52+0.2)       3       12.05.2010 17   Snap Gauge (Go-nogo) Local-India       (18.03-18.30)       (24.10-24.50)       (30.30-30.50)             3       12.05.2010 18   Pin Dial Gauge with stand Mitutoyo- Japan       2       12.05.2010 19   Bore  Dial Gauge   I.D. Mitutoyo –Japan       32 to 62 mm             3       12.05.2010 20.   Bore  Dial Gauge   I.D. Mitutoyo-Japan       18 to 35 mm       3       12.05.2010 21   Angle Protector Local-India       3       12.05.2010